What is the best way to clean SeaDek?

So you just got back from an epic day on the water and everyone was in love with your new SeaDek kit, but now it’s time to clean up and all the fun of the day has left a serious mess on deck. So now you are wondering, what is the best way to clean my new SeaDek kit?

Because of its closed-cell composition, SeaDek is non-absorbent and naturally stain-resistant, so dirt and grime stay on the surface, making cleanup much easier than other flooring materials like carpet.

Cleaning SeaDek with Dek Magic

For easy removal of most common stains and spills, as well as general cleaning, reach for Dek Magic, a cleaner specifically formulated for cleaning PE/EVA foam decking. Just apply Dek Magic to the areas to be cleaned, work it in with a medium bristled boat brush, let it sit for 3-5 minutes, and rinse! Dek Magic is great for removing really tough stains from things like oil, blood, and wine, and is also safe for most other boat surfaces, including vinyl and PVC.

SeaDek Dek Magic

If Dek Magic isn’t available, SeaDek can also be cleaned with a variety of household cleaners.

To clean dirt, footprints, etc. from your SeaDek, use an all-purpose cleaner, degreaser, or dish soap along with warm water and a medium bristled brush. Thoroughly work the soapy mixture into the SeaDek until dirt, etc. comes up. Rinse with clean water and repeat if necessary.

For stubborn stains that persist, mix a bleach solution with one cup of bleach per gallon of water. Using a soft-bristled brush, scrub in a circular motion until the stain comes out. Rinse thoroughly with clean water and repeat if necessary.

Cleaning SeaDek with Dek Magic

Sometimes anchor rode or non-stainless hardware can leave unsightly rust stains. For this, we recommend a cap full of vinegar or oxalic acid. Apply to the rust stain and allow to soak for 3-5 minutes. If necessary, use latex/nitrile gloves to massage the cleaner into the texture of the SeaDek pad. Rinse with water and repeat if necessary. When applying oxalic acid, use care to avoid getting acid on the edges of the pad, as it could damage the lamination or PSA.

Finally, one of the easiest ways to clean your SeaDek after a day on the water is with the help of a light-duty, low PSI pressure washer (similar to the type used in a car wash). Using a wide-angle tip and care to keep a suitable distance from the material to avoid damage, watch the evidence of a fishing trip quickly disappear. Please note that while pressure washing is a great way to keep your SeaDek looking new, caution must be used to avoid any damage.

While SeaDek is easy to clean, make the job even easier by tending to any stains, spills, or leaks as soon as possible!

Products to Avoid:

o Meguiars Car Wash
o Armor All
o Simple Green
o 303 Citrus Boat Cleaner
o Woodys Wash and Wax
o Starbrite Mildew

Click here to view answers to other frequently asked questions!

For more information about cleaning and maintaining your SeaDek, contact our Customer Advocate Team at 321-632-4466 or customerservice@seadek.com.

This entry was posted in anti fatigue mat, boating, Custom SeaDek, marine non skid, marine nonskid, marine nonslip, marine products, no slip, no slip mat, no slip pad, no slip seadek, non skid, non skid marine non slip, nonskid, nonslip, seadek, seadek custom pads, SeaDek Marine Products, swim paltform pad and tagged , , , , , , , , , , , , , . Bookmark the permalink.


Comments are closed.